Katy, TX · Houston MetroMon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET

Warehouse & Industrial Roofing in Houston, TX

A warehouse roof is the largest single roof most owners will ever deal with, and it fails in the quietest way: water standing where it should run off, a seam lifting at the edge, a drain blocked with debris. The building below keeps working while the roof above it slowly stops shedding water — until the day the water finds its way inside, over stock, over equipment, over the floor.

Call Now

Talk to a local roofing professional

One call connects you with a local professional for the Houston metro. Describe your roof — what you are seeing, and where — and the visit is arranged from there.

Call Now

Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET

1
Inspection firstEvery visit starts by looking at the roof, not by guessing from the ground.
2
Storm damage coveredHail, wind and hurricane damage — inspected and documented step by step.
3
Local to the metroKaty, Houston and nine more metro communities, with local detail on every page.
4
One callCall Now connects you with a local roofing professional for your area.
Understanding warehouse & industrial roofing

How warehouse & industrial roofing roofing works in the Houston metro

Warehouse roofs are low-slope roofs, and low-slope roofs are drained roofs. The membrane — TPO, PVC, EPDM or modified bitumen — is the covering, but the drainage is what keeps it dry: the slope to the outlets, the drains and scuppers, and the edge details where the membrane meets the parapet. A low-slope roof that drains is a roof that lasts; a low-slope roof that ponds is a roof whose membrane sits in water, and water sitting on a membrane is the earliest warning the roof gives.

Membrane choice is a building decision, not a catalogue decision. TPO suits a large, open roof with long welded seams; PVC suits a roof where chemical exposure matters; EPDM suits a roof where the membrane must flex with the building; modified bitumen suits a roof where the covering is laid in layers and the seams are torched or adhered. Each system has its own seam detail, its own flashing detail, and its own way of failing — and the inspection reads the membrane that is there before naming the membrane that should be.

The 48-hour ponding rule is the line the inspection draws. Water that stands on a flat roof for more than two days is noted, and its cause is found: a blocked drain, a settled section, or a slope that no longer runs to the outlet. Standing water adds weight the structure must carry, ages the membrane where it sits, and finds the seam that has lifted. The first check on any warehouse roof is the drains and scuppers, because the drainage decides the roof before the membrane does.

  • Membrane choice by building — TPO, PVC, EPDM or modified bitumen
  • 48-hour ponding rule — standing water noted and its cause found
  • Drains and scuppers first — the drainage read before the membrane
  • March and November inspection rhythm for flat roofs
  • Work planned around operations, so downtime stays minimal

Talk to a local roofing professional

One call connects you with a local professional for the Houston metro. Describe the building — its size, its roof type, and what the roof is doing — and the visit is arranged from there.

Call Now

Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET

What it includes

What warehouse & industrial roofing roofing includes

Membrane systems

TPO, PVC, EPDM and modified bitumen — the system matched to the building, the roof's exposure and the way the membrane must be seamed. The inspection reads the membrane that is there before naming the one that should be.

Drainage and ponding

Drains, scuppers and the slope to the outlets are read first on every visit. Water standing more than two days is noted and its cause is found — a blocked drain, a settled section, or a slope that no longer runs to the outlet.

Seam inspection

Heat-welded and adhered seams are read along their whole length, because a seam that has lifted at the edge lets water under the membrane. Seams are re-welded where they have lifted, not smeared over.

Parapet and edge details

The membrane where it meets the parapet and the edge metal is checked, because the edge is where wind lifts the membrane and where water finds its way under it. Edge details are renewed with the membrane work.

Rooftop equipment curbs

Curbs for HVAC units, vents and skylights are flashed and checked, because every penetration is a joint and every joint is a place water can enter. Equipment that has been added since the roof was laid gets its flashing read with the rest.

Downtime planning

Work is planned around the building's operations — phased across the roof, set in the hours the building can spare, and sequenced so the roof is never left open while the building is working below it.

Scheduling & disruption

How the work fits around the building

Warehouse work is scheduled around the building, not the other way round. The roof is phased in sections, so one section is finished and dry before the next begins, and the building below keeps working through the whole job. Noisy work and tear-off are set in the hours the building can spare, and the quieter work — flashing, finishing, clean-up — fills the rest. The schedule is written into the plan before the first section starts, so the operations team can plan around it.

Downtime is minimised by sequencing, not by rushing. A section torn off in the morning is underlaid and covered the same day, so the roof is never left open overnight and the building below never sits under an open roof. The crew moves across the roof in an order the inspection set — the worst drainage first, the worst seams first — and each finished section is a section the building no longer worries about.

How it works

The visit, step by step

1

Call and describe the building

Say how large the roof is, what membrane it carries, and what it is doing — ponding, leaking, seams lifting, or simply unlooked at for years.

2

Inspection of membrane and drainage

A local professional walks the whole roof, reads the membrane and the seams, clears and runs the drains and scuppers, and notes the ponding with its cause.

3

Plan for membrane and drainage

The plan names the membrane system, the drainage work and the phase order — worst drainage first — with the schedule set around the building's operations.

4

Phased work, section by section

The work runs in sections, each one finished and dry before the next begins, so the building below keeps working through the whole job.

5

Record kept and rhythm set

Each visit adds to the written record, and the March and November rhythm is set from what the record shows, so the drains and seams are read before the wettest months and after them.

How the work is done

Methods for this building type

Each visit follows the same list, so nothing is skipped and each visit can be read against the last. The membrane is walked in full, the seams are read along their length, the drains and scuppers are cleared and run, the ponding is noted with its depth and its age, and the edge details and equipment curbs are checked. The attic — where the building has one — is checked for daylight and damp. The list is the same every time, and the record shows what changed between visits.

Drainage is checked by running water, not by looking at it. A drain that looks clear can still run slow, and a scupper that looks open can still be blocked behind its lip. The visit clears each drain and scupper and runs water through it, so the drainage is proved, not assumed. A drain that runs slow is a drain that ponds the roof in the next rain, and the cause — debris, a settled section, a slope that no longer runs — is found on the visit, not after the next storm.

Membrane work is done in sections, one at a time, so the roof is never left open to a sudden Houston downpour. The membrane comes off a section, the deck is checked, the new layer goes down with its seams welded, and the section is closed before the crew moves to the next. That sequence matters on a roof the size of a warehouse, where a storm that arrives mid-job finds the finished sections dry and the open one covered.

Before the visit

Note the building type, the roof material, its rough age, and what you are seeing — where the problem shows inside, and when it started. The inspection follows your evidence, so the notes help more than a climb ever will.

Call Now

Signs to watch

Signs for this building type

Ponding is the first sign, and it is easy to see: water standing on the roof two days after rain, in the same places, season after season. A pond that never drains is a slope that no longer runs to the outlet, and a membrane that sits in water ages where the water sits. The inspection notes the ponding with its depth and its age, and finds its cause — a blocked drain, a settled section, or a slope that has moved — because the pond is the symptom and the drainage is the cause.

Lifted seams are the second sign, and they are found by walking the roof, not by looking at it from the ground. A seam that has lifted at the edge lets water under the membrane, and the water travels under the covering before it shows inside — as a stain on the ceiling, a damp patch on a wall, or water over stock. The seam is re-welded where it has lifted, and the drain beside it is checked at the same time, because a lifted seam and a blocked drain are often the same roof's two failures.

The third sign is inside the building: a stain on the ceiling over the warehouse floor, damp on a wall beside a parapet, or water over equipment after a storm. A stain inside a warehouse is a roof that has already failed, and the inspection traces it from the stain back to the entry — the seam, the drain, the curb, or the edge — because the water travels under the membrane before it shows, and the entry can sit far from the stain.

Houston weather

Warehouse & Industrial Roofing roofing and the Houston climate

Houston weather tests a warehouse roof at its largest scale. Spring hail dents the vents and the rooftop equipment and bruises the membrane where it strikes; summer heat ages the membrane and dries the seals at the curbs; hurricane wind lifts the membrane at the edges and drives rain under the laps on the windward side. A roof the size of a warehouse takes the whole storm at once, and the inspection after the season reads the whole roof at once — membrane, seams, drains and edges together.

That is why the March and November rhythm matters more on a warehouse than on a single home. March comes before the spring storms, so the drains and seams are read while they are still sound; November comes after hurricane season, so the season's wear is read and put right. A warehouse roof visited only once a year is a roof whose drains are read once a year, and a blocked drain in May is a pond that sits all summer, over stock, over equipment, over the floor.

The Ship Channel adds its own exposure to the warehouses of Pasadena and the east side of the metro. Industrial buildings there meet the same hail and hurricane seasons as the rest of the metro, with the added wear of rooftop equipment, vents and ductwork that a warehouse roof carries more of than a home. The equipment curbs are read with the membrane, because every penetration is a joint, and the joints are where a warehouse roof fails first.

In more detail

The drains first — why drainage decides the roof

The first check on any warehouse roof is the drains and scuppers, and the reason is simple: the drainage decides the roof before the membrane does. A membrane in perfect condition over a blocked drain is a roof that ponds, and a roof that ponds is a roof whose membrane sits in water. The water adds weight the structure must carry, ages the membrane where it sits, and finds the seam that has lifted. No membrane, however well welded, saves a roof that cannot drain.

Reading the drainage means running water, not looking at it. Each drain and scupper is cleared and run on the visit, so the drainage is proved, not assumed — a drain that looks clear can still run slow, and a scupper that looks open can still be blocked behind its lip. The slope to the outlets is read with a level and by eye, because a section that has settled no longer runs to the outlet even when the drain beside it is clear. The cause of a pond is found on the visit: debris, a settled section, or a slope that has moved — and the fix follows the cause, not the pond.

What the drainage read does not do is blame the membrane for the drain's failure. A pond caused by a blocked drain is fixed by clearing the drain and, where the slope has settled, by restoring the fall to the outlet — not by replacing a membrane that is still sound. The plan names the drainage work and the membrane work separately, so the building pays for the fix the roof needs, and the roof drains as it was built to drain.

Before & after

Problem → solution

Problem

A Pasadena warehouse with a low-slope membrane roof: water standing in the same places two days after every rain, a seam lifting at the edge, and a stain on the ceiling over the warehouse floor after the last storm.

→

Solution

The inspection read the drains first — two blocked, one running slow — and the membrane second. The drains were cleared and run, the settled section was restored to fall, the lifted seam was re-welded, and the March and November rhythm was set so the drainage is read before the wettest months and after them.

Problems solved

Problems warehouse & industrial roofing roofing solves in the Houston metro

Ponding water

Water standing more than two days is noted and its cause is found — a blocked drain, a settled section, or a slope that no longer runs to the outlet.

Lifted seams

A seam that has lifted at the edge lets water under the membrane. Seams are re-welded where they have lifted, and the drain beside them is checked too.

Blocked drains

Leaves and debris block drains and scuppers, and water backs up across the roof. Drains are cleared and run on every visit, so the drainage is proved.

Edge and parapet leaks

Wind lifts the membrane at the edges and water finds its way under it at the parapet. Edge details are renewed with the membrane work.

Related

Services and areas for warehouse & industrial roofing

Services for this building type: Flat & Commercial Roofing · Roof Maintenance · Roof Inspection

Where this work is done: Pasadena, TX · Houston, TX · All industries →

Questions

Frequently asked questions

Straight answers to the questions Houston metro homeowners ask most.

Water that stands on a flat roof for more than two days is noted and its cause is found — a blocked drain, a settled section, or a slope that no longer runs to the outlet. Standing water adds weight, ages the membrane where it sits, and finds the seam that has lifted.

It depends on the building: TPO suits a large, open roof with long welded seams; PVC suits a roof where chemical exposure matters; EPDM suits a roof where the membrane must flex; modified bitumen suits a roof laid in layers. The inspection reads the membrane that is there before naming the one that should be.

In March and November, as well as after every big storm. March comes before the spring storms, so the drains and seams are read while they are still sound; November comes after hurricane season, so the season's wear is read and put right.

Because the drainage decides the roof before the membrane does. A membrane in perfect condition over a blocked drain is a roof that ponds, and a roof that ponds is a roof whose membrane sits in water. The drains are cleared and run on every visit, so the drainage is proved.

Yes — the work is phased in sections, so one section is finished and dry before the next begins, and the building below keeps working through the whole job. The schedule is written into the plan before the first section starts, so the operations team can plan around it.

A blocked drain, a settled section, or a slope that no longer runs to the outlet. The inspection finds the cause on the visit, because the pond is the symptom and the drainage is the cause — and the fix follows the cause, not the pond.

By walking the roof and reading the seams along their whole length. A seam that has lifted at the edge lets water under the membrane, and it is re-welded where it has lifted, not smeared over. The drain beside a lifted seam is checked at the same time.

The flashing around every curb — HVAC units, vents, skylights — because every penetration is a joint and every joint is a place water can enter. Equipment added since the roof was laid gets its flashing read with the rest.

It is larger, lower in slope, and drained rather than shed — the membrane, the seams and the drainage do the work that shingles and slope do on a home. The inspection reads the whole roof at once, because one storm marks the whole roof at once.

Water gets under the membrane and travels before it shows inside — as a stain on the ceiling, a damp patch on a wall, or water over stock. A lifted seam left through a storm season is a leak that shows far from where it entered.

The exposure is the same hail and hurricane seasons as the rest of the metro, with more rooftop equipment, vents and ductwork than a home carries. The equipment curbs are read with the membrane, because the joints are where a warehouse roof fails first.

Warehouse & Industrial Roofing roof problem in the Houston metro?

Call now — we will connect you with an independent local roofing professional for an inspection and a clear plan for warehouse & industrial roofing roofing.

Call Now
Contact

Talk to a local roofing professional

One call connects you with a local professional for Katy, Houston and the metro around them. Describe your roof — what you are seeing, where the problem shows, and when it started — and the visit is arranged from there.

Call Now

Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET

Service area

Katy · Houston · Sugar Land · Cypress · The Woodlands · Pearland · Spring · Pasadena · Humble · Kingwood

Houston Roofing Pros is a referral service connecting customers with local roofing professionals; it is not itself the service company.

☎ Call Now
Houston Roofing Pros